PCD polycrystalline diamond tooling is used on carbon composite and other non-metallic materials where high abrasion resistance is required.

Jump To

PCD tooling is comprised of synthetic diamond particles bonded to a tungsten carbide substrate. These types of products can be used on a range of workpiece materials such as carbon composites, rubber, fibreglass, carbon fibre and reinforced plastics.

Our wealth of experience in the design and manufacture of PCD tooling has allowed us to develop a range of standard and specialist tooling for the aerospace, automotive and general machining industries. Our range of PCD tooling is expertly manufactured, has a long life and provides a uniform finish for high quality parts. PCD can also be re-worked when wear is apparent.

PCD Tooling

GT60 – PCD Countersink (removable pilot)

For machining carbon composites

Fixed pilots with corner radius also available (GT-61)


PCD 2 flute Countersink Tooling PCD 3 flute Countersink Tooling PCD 3 flute Countersink Tooling 130 degree
2 Flute Countersink 3 Flute Countersink 3 Flute Countersink


Code Pilot Diameter Shank Diameter Cutter Diameter No. of Flutes Thread
GT-60-2.00-10 2.00 2.00 10.00 2 6 x 1
GT-60-2.38-10 2.38 2.00 10.00 2 6 x 1
GT-60-2.50-10 2.50 2.00 10.00 2 6 x 1
GT-60-2.80-10 2.80 2.50 10.00 2 6 x 1
GT-60-3.00-10 3.00 2.50 10.00 2 6 x 1
GT-60-3.17-10 3.17 2.50 10.00 2 6 x 1
GT-60-3.50-10 3.50 3.00 10.00 2 6 x 1
GT-60-4.00-10 4.00 3.50 10.00 2 6 x 1
GT-60-4.17-10 4.17 3.50 10.00 2 6 x 1
GT-60-4.76-14 4.76 4.00 14.00 2 8 x 1
GT-60-4.83-14 4.83 4.00 14.00 2 8 x 1
GT-60-5.00-14 5.00 4.00 14.00 2 8 x 1
GT-60-5.60-14 5.60 4.00 14.00 2 8 x 1
GT-60-6.00-14 6.00 4.00 14.00 2 8 x 1
GT-60-6.35-14 6.35 4.00 14.00 2 8 x 1
GT-60-7.94-17 7.94 5.00 17.00 3 8 x 1
GT-60-8.00-17 8.00 5.00 17.00 3 8 x 1
GT-60-9.52-21 9.52 5.00 21.00 3 8 x 1
GT-60-10.00-21 9.52 5.00 21.00 3 8 x 1
GT-60-11.11-22.22 11.11 6.00 22.20 3 10 x 1
GT-60-11.11-25.40 11.11 6.00 25.40 3 10 x 1
GT-60-12.70-28.57 12.70 6.00 28.57 3 10 x 1
GT-60-12.70-31.75 12.70 6.00 31.75 3 10 x 1
GT-60-14.29-34.92 14.29 6.00 34.92 3 10 x 1
GT-60-15.86-38.10 15.87 6.00 38.10 3 10 x 1


GT85 – PCD Router

For machining carbon composites, an alternative cutter to the the cross cut router. Generally used on machines with controlled feeds. This type of cutter gives extended tool life in composites and M.D.F materials.



PCD Router 10mm

PCD Router 10mm length of cut

PCD Router 25mm

PCD Router 25mm length of cut



GT86 – 2 Flute PCD Compression Router

PCD Tooling, PCD compression Router

Solid Carbide Shanks

For machining carbon composites



Part No. Diameter mm Length mm
GT-86-4.0 4.0 62.0
GT-86-5.0 5.0 62.0
GT-86-6.0 6.0 62.0
GT-86-7.0 7.0 62.0
GT-86-8.0 8.0 62.0


GT82 – PCD Drill

PCD tooling drill

Solid Carbide Shanks

P.C.D Drills 118° POINT ANGLE

PCD drill drawing
Part No. D1 D2 D3
GT-82-3.0 3.0 3.5 2.5
GT-82-3.5 3.5 4.0 3.0
GT-82-4.0 4.0 4.5 3.5
GT-82-4.5 4.5 5.0 4.0
GT-82-5.0 5.0 5.5 4.5
GT-82-5.5 5.5 6.0 5.0
GT-82-6.0 6.0 6.5 6.5
GT-82-6.5 6.5 7.0 6.0
GT-82-7.0 7.0 7.5 6.5
GT-82-7.5 7.5 8.0 7.0
GT-82-8.0 8.0 8.5 7.5
GT-82-8.5 8.5 9.0 8.0
GT-82-9.0 9.0 9.5 8.5
GT-82-9.5 9.5 10.0 9.0
GT-82-10.0 10.0 10.5 9.5
GT-82-10.5 10.5 11.0 10.0
GT-82-11.0 11.0 11.5 9.5
GT-82-11.5 11.5 12.0 11.0
GT-82-12.0 12.0 12.5 11.5



For further information contact us on 0161 627 2627 or email sales@gandtrack.com

Gandtrack composite cutting tools are born from a 35 year pedigree of composite cutting experience in the aerospace, marine and auto sport experience. They are fully Quality Assured and made in the UK to the highest standards available.
Unfortunately, cheap imitations bearing the Gandtrack logo have recently appeared in South East Asia, and now Europe. Please ensure you source from a reliable source and if you have any doubts, please let us know via our contact form immediately.